When you set out to build the very best, you work with only the best. That's why XR component woofers are built with suspensions and cones from the world's best manufacturer of such parts: Dr. Kurt Muller and Co. These parts are expensive, but they also represent the best the world has to offer and are integral to the incredible sonic quality and consistency of the XR products. The long-throw component woofer features a mineral-filled, polypropylene cone body with a butyl rubber surround and a highly optimized motor system, delivering stunning midbass impact and midrange quality. The tweeter is a neodymium magnet, ferrofluid-cooled, 1-inch (25mm) aluminum dome with a synthetic rubber surround that damps unwanted ringing for smooth, non-fatiguing output. The component tweeter features JL AUDIO's exclusive RSR mounting system, permitting precise alignment after installation for optimum performance. Competition-ready, high-end crossover networks with super-premium polypropylene capacitors, super-premium inductors, adjustable tweeter level and solid-state tweeter protection round out the package. The crossover networks are attractively presented in a smoked acrylic case that complements any installation. This exceptional component system will recalibrate your reference standard for automotive sound.
- JL Audio XR650-CSi 6-1/2" XR-Series 2-way Component System
- Peak: 300 watts per set / 150 watts each side
- RMS: 140 watts per set / 70 watts each side
- Suspensions and cones built from the world's best manufacturer of such parts: Dr. Kurt Muller and Co.
- Long-throw component woofer features a mineral-filled, polypropylene cone and butyl rubber surround
- Woofers have a highly optimized motor system that delivers stunning midbass impact and midrange quality.
- The tweeters use a neodymium magnet and are ferrofluid-cooled. They are 1" (25mm) aluminum dome with a synthetic rubber surround that damps unwanted ringing for smooth, non-fatiguing output. They feature a variable mounting system with swivel / rotation capability.
- High-end, programmable crossover networks:
- 1st order low-pass and 2nd order high-pass circuit
- Premium polypropylene capacitors
- Premium inductors
- Solid-state tweeter protection
- Can be programmed to 15 possible settings (3 midrange presence settings, 5 tweeter level settings)
- Efficiency: 89.5 dB @ 1W/1m
- Frequency Response: 48 Hz - 25 KHz ± 3 dB
- Xmax: 2.5 mm
- Woofer Physical Specifications:
- Frame Outer Diameter: 165.5 mm
- Grille Tray Diameter: 171.4 mm
- Magnet Diameter: 82 mm
- Frontal Grille Protrusion: 21.2 mm
- Mounting Hardware Included
- Grilles Not Included
(Excellent)
based on 1 review
