Sony's Xplod amps combine form and function in a mix that'll make your system look and sound great. On the outside, the sleek inverted heat sink keeps vital internal components running cooler and lasting longer. Removable terminal covers keep all the wire connections protected and out of sight for a clean-looking installation.
Description:
-
110W x 4 Max Power into 4 Ohms
-
150W x 2 (at 2 Ohms) + 300W x1 (at 4 Ohms) Max Power
-
60W x 2 RMS into 4 Ohms
-
65W x 4 RMS into 2 Ohms
-
High Level Sensing Power On
-
80Hz High Pass filter with -12dB/Octave Slope
-
80Hz Low Pass Filter with -18dB/Octave Slope
-
MOSFET Power Supply
-
RCA & speaker level inputs
-
Line level thru-put
-
CEA-2006 Power Compliant
Output Power:
-
CEA Rating: 60W x 4
-
DIN 45500 Rating (@ 14 V, THD 0.5 %)
-
4 ohm: 4 x 60W
-
2 ohm: 4 x 65W
-
Rated/THD (@ 14.4 V, 20 Hz - 20 kHz)
-
4 ohm: 4 x 60W / 1.0% (14.4V, 20 - 20kHz)
-
2 ohm: 4 x 65W / 0.1% (14.4V, 20 - 20kHz)
-
Maximum (@ 14.4 V)
-
4 ohm: 4 x 110W
-
2 ohm: 4 x 150W
Input:
-
Low Pass Filter: 80Hz
-
LPF Roll Off Rate: -18dB/oct
-
Subsonic High Pass Filter :: 80Hz
-
Input sensitivity: 0.3 - 6Volts
Output:
-
Frequency Response: 5Hz - 50kHz
-
Tolerance: +0 / -3dB
-
Total Harmonic Distortion (@1 kHz): 0.005%
-
CEA SN Ratio: 97dB
-
Min Load Impedance/Ch: 2 ohm
General:
-
Current drain (@ Rated Power - 4?): 33 Amps (at 4 ohm)
-
Weight (approx.)(kg): 3.1
-
Dimensions (WxHxD in mm) approx: 396x55x256
; newWindow.focus())
